Watch Mount

Watch Mount

AS-WT100BLK

Regular price $30.00
/
Shipping calculated at checkout.

Mount your watch Outfront and Center using our mounting arm and universal adapter.

    Works with any Performance watch like Polar®, Garmin®, Fitbit®, Sunnuto®, Apple® that mounts to a 31.8mm bar.

    Mounting Arm

    • Mount up to Two devices on one Mounting Arm
    • Mount your devices out-front or behind the bars
    • Rotate and slide your devices to multiple positions
    • Free up bar space with only one mount for all your devices
    • Buy only one mount and save money
    • No need to buy new mounts for new devices
    • Strong, light, and shock absorbing
    • Fits all 31.8mm diameter bars
    • Torque not to exceed 1.6Nm/14inlbs

    Universal Adapter

    • Mount any 31.8mm bar mountable device on the Universal Adapter
    • Mount a Light Out front, Center and lower to the ground for improved lighting
    • Mount your Cycling Computer Out front
    • Torque not to exceed 1.6Nm/14inlbs
    Made from a CARBON composite Nylon
    Weight 52g
    Designed, engineered and manufactured in the U.S.A

      Instructions

      Mounting Arm

      • Mount onto the handle bar to the left or right of the stem and tighten with a 3mm Hex wrench.
      • Torque not to exceed 1.6Nm/14inlbs.

      Adapters

      • Remove the bolt and washer from the adapter and install into the mounting arm slot.
      • Thread on the adapter with the washer on the opposite side flush against the bolt head.
      • Torque to no more than 1.6Nm/14inlbs using a Hex wrench.
      • Apply a small amount of Blue LOCTITE® #242 to the threads of the adapter bolt if needed to keep it from coming loose.

      Carbon Fiber Stem Mount

      • Replace the stem’s screws (the bottom left and right), by inserting the spacer first, then the mount, washer and finally the long black Titanium screws.
      • Don’t use excessive force it may break the product and void the warranty.
      • Tighten the screws using the torque suggested by your stem manufacturer approx. 2 to 3Nm and lube the bolt with anti-seize grease.
      • Check holes for alignment between front clamp & stem. If there is an alignment mismatch top to bottom, the screw can undergo abnormal stresses and could break.
      • Before tightening make sure that the titanium screw penetrates the stem with full thread engagement. If screws don’t fully engage, please contact us.