Bryton Computer Adapter
Bryton Computer Adapter
Bryton Computer Adapter
Bryton Computer Adapter
Bryton Computer Adapter
Bryton Computer Adapter
Bryton Computer Adapter
Bryton Computer Adapter
Bryton Computer Adapter
Bryton Computer Adapter

Bryton Computer Adapter

AD-B100B

Regular price $10.00
/
Shipping calculated at checkout.

Mount your computer Out front and Center of the bars. Slide and Rotate to eliminate glare and optimize the viewing angle.

Works with BRYTON® Rider 10, 15, 320, 420, 530, 860 series computers.

Features

  • Cycling Computer Adapter works with BRYTON® Rider 10, 15, 320, 420, 530, 860 series computers.
  • Slide and Rotate: Slide and Rotate your computer to most positions.
  • Eliminate Glare: Rotate your computer to Eliminate Glare.
  • Optimize the Viewing Angle: Rotate and Slide the computer to your Optimum-Viewing Angle.
  • Torque not to exceed 1.6Nm/14inlbs
Made from a CARBON composite Nylon
Weight 8g
Designed, Engineered and Made in the U.S.A

Instructions

Mounting Arm

  • Mount onto the handle bar to the left or right of the stem and tighten with a 3mm Hex wrench.
  • Torque not to exceed 1.6Nm/14inlbs.

Adapters

  • Remove the bolt and washer from the adapter and install into the mounting arm slot.
  • Thread on the adapter with the washer on the opposite side flush against the bolt head.
  • Torque to no more than 1.6Nm/14inlbs using a Hex wrench.
  • Apply a small amount of Blue LOCTITE® #242 to the threads of the adapter bolt if needed to keep it from coming loose.

Carbon Fiber Stem Mount

  • Replace the stem’s screws (the bottom left and right), by inserting the spacer first, then the mount, washer and finally the long black Titanium screws.
  • Don’t use excessive force it may break the product and void the warranty.
  • Tighten the screws using the torque suggested by your stem manufacturer approx. 2 to 3Nm and lube the bolt with anti-seize grease.
  • Check holes for alignment between front clamp & stem. If there is an alignment mismatch top to bottom, the screw can undergo abnormal stresses and could break.
  • Before tightening make sure that the titanium screw penetrates the stem with full thread engagement. If screws don’t fully engage, please contact us.

You may also like