Polar Computer Mounts and Adapters

Filter

Computer
GoPro
Light
Mounting Arm
Polar

Computer
GoPro
Light
Mounting Arm
Polar

FOR POLAR® M460 and V650 COMPUTERS

Sort

Quick view

Polar Computer & Camera/Light Mount

$40.00

Blue Orange Black Red Green Purple

Quick view

Polar Computer & Camera Mount

$40.00

Blue Orange Black Red Green Purple

Quick view

Polar Computer & Light Mount

$40.00

Blue Orange Black Red Green Purple

Quick view

Polar Computer Mount

$30.00

Blue Orange Black Red Green Purple

Quick view

Polar Computer Adapter

$10.00

Blue Orange Black Red Purple Green

Polar Computer & Camera/Light Mount

AS-PCL100B

Regular price $40.00

Shipping calculated at checkout.

Mount your Cycling Computer and Camera or Light Out front and Center using just One mounting arm. Mount features a GoPro style 3 Tab adapter with M5 threaded insert. Slide and Rotate the Computer to the Optimum Viewing Angle and position your camera or light below the bars and out of harms way.

Works with POLAR® M460 and V650 series computers and all GoPro® Hero Cameras, Action Cameras and Cycling lights.

Mounting Arm

Mount up to Two devices on one Mounting Arm
Mount your devices out-front or behind the bars
Rotate and slide your devices to multiple positions
Free up bar space with only one mount for all your devices
Buy only one mount and save money
No need to buy new mounts for new devices
Strong, light, and shock absorbing
Fits all 31.8mm diameter bars
Torque not to exceed 1.6Nm/14inlbs

Cycling Computer Adapter

Works with POLAR® M460 and V650 series computers.
Slide and Rotate: Slide and Rotate your computer to most positions.
Eliminate Glare: Rotate your computer to Eliminate Glare.
Optimize the Viewing Angle: Rotate and Slide the computer to your Optimum-Viewing Angle.
Torque not to exceed 1.6Nm/14inlbs

Cycling Camera & Light Adapter

Camera & Light Adapter works with all GoPro® Hero Cameras and Action Cameras and Cycling Lights with a Two Tab interface and M5 Bolt.
Lights require an Two Tab adapter to connect to our adapter like the K-Edge aluminum adapter.
Positions your Camera or Light Out front and Center
Camera can be mounted facing forward or backwards
Rotate and Slide your Camera to capture different views
Mounts Upside down or Right side up
Torque not to exceed 1.6Nm/14inlbs.

Made from a CARBON composite Nylon
Weight 54g
Designed, Engineered and Made in the U.S.A

Instructions

Mounting Arm

Mount onto the handle bar to the left or right of the stem and tighten with a 3mm Hex wrench.
Torque not to exceed 1.6Nm/14inlbs.

Adapters

Remove the bolt and washer from the adapter and install into the mounting arm slot.
Thread on the adapter with the washer on the opposite side flush against the bolt head.
Torque to no more than 1.6Nm/14inlbs using a Hex wrench.
Apply a small amount of Blue LOCTITE® #242 to the threads of the adapter bolt if needed to keep it from coming loose.

Carbon Fiber Stem Mount

Replace the stem’s screws (the bottom left and right), by inserting the spacer first, then the mount, washer and finally the long black Titanium screws.
Don’t use excessive force it may break the product and void the warranty.
Tighten the screws using the torque suggested by your stem manufacturer approx. 2 to 3Nm and lube the bolt with anti-seize grease.
Check holes for alignment between front clamp & stem. If there is an alignment mismatch top to bottom, the screw can undergo abnormal stresses and could break.
Before tightening make sure that the titanium screw penetrates the stem with full thread engagement. If screws don’t fully engage, please contact us.

Name

Message

Polar Computer & Camera Mount

AS-PGP100B

Regular price $40.00

Shipping calculated at checkout.

Mount your Cycling Computer and Camera Out front and Center using just One mounting arm. Slide and Rotate the Computer to the Optimum Viewing Angle and position your camera below the bars and out of harms way.

Works with POLAR® M460 and V650 series computers and all GoPro® Hero Cameras and Action Cameras

Mounting Arm

Mount up to Two devices on one Mounting Arm
Mount your devices out-front or behind the bars
Rotate and slide your devices to multiple positions
Free up bar space with only one mount for all your devices
Buy only one mount and save money
No need to buy new mounts for new devices
Strong, light, and shock absorbing
Fits all 31.8mm diameter bars
Torque not to exceed 1.6Nm/14inlbs

Cycling Computer Adapter

Works with POLAR® M460 and V650 series computers. computers.
Slide and Rotate: Slide and Rotate your computer to most positions.
Eliminate Glare: Rotate your computer to Eliminate Glare.
Optimize the Viewing Angle: Rotate and Slide the computer to your Optimum-Viewing Angle.
Torque not to exceed 1.6Nm/14inlbs

Cycling Camera Adapter

Camera Adapter works with all GoPro® Hero Cameras and Action Cameras
Positions your Camera Out front and Center
Camera can be mounted facing forward or backwards
Rotate and Slide your Camera to capture different views
Mounts Upside down or Right side up
Easily remove and attach the camera with the quick release adapter
Torque not to exceed 1.6Nm/14inlbs.

Made from a CARBON composite Nylon
Weight 54g
Designed, Engineered and Made in the U.S.A

Instructions

Mounting Arm

Mount onto the handle bar to the left or right of the stem and tighten with a 3mm Hex wrench.
Torque not to exceed 1.6Nm/14inlbs.

Adapters

Remove the bolt and washer from the adapter and install into the mounting arm slot.
Thread on the adapter with the washer on the opposite side flush against the bolt head.
Torque to no more than 1.6Nm/14inlbs using a Hex wrench.
Apply a small amount of Blue LOCTITE® #242 to the threads of the adapter bolt if needed to keep it from coming loose.

Carbon Fiber Stem Mount

Replace the stem’s screws (the bottom left and right), by inserting the spacer first, then the mount, washer and finally the long black Titanium screws.
Don’t use excessive force it may break the product and void the warranty.
Tighten the screws using the torque suggested by your stem manufacturer approx. 2 to 3Nm and lube the bolt with anti-seize grease.
Check holes for alignment between front clamp & stem. If there is an alignment mismatch top to bottom, the screw can undergo abnormal stresses and could break.
Before tightening make sure that the titanium screw penetrates the stem with full thread engagement. If screws don’t fully engage, please contact us.

Name

Message

Polar Computer & Light Mount

AS-PU100B

Regular price $40.00

Shipping calculated at checkout.

Mount your Cycling Computer and Light Out front and Center using just One mounting arm. Slide and Rotate the Computer to the Optimum Viewing Angle and position your Light lower to the ground for improved lighting.

Works with POLAR® M460 and V650 series computers.

Mounting Arm

Mount up to Two devices on one Mounting Arm
Mount your devices out-front or behind the bars
Rotate and slide your devices to multiple positions
Free up bar space with only one mount for all your devices
Buy only one mount and save money
No need to buy new mounts for new devices
Strong, light, and shock absorbing
Fits all 31.8mm diameter bars
Torque not to exceed 1.6Nm/14inlbs

Cycling Computer Adapter

Works with POLAR® M460 and V650 series computers.
Slide and Rotate: Slide and Rotate your computer to most positions.
Eliminate Glare: Rotate your computer to Eliminate Glare.
Optimize the Viewing Angle: Rotate and Slide the computer to your Optimum-Viewing Angle.
Torque not to exceed 1.6Nm/14inlbs

Universal Adapter

Mount any 31.8mm bar mountable device on the Universal Adapter
Mount a Light Out front, Center and lower to the ground for improved lighting
Mount your Cycling Computer Out front
Torque not to exceed 1.3Nm/12inlbs

Made from a CARBON composite Nylon
Weight 52g
Designed, engineered and manufactured in the U.S.A

Instructions

Mounting Arm

Mount onto the handle bar to the left or right of the stem and tighten with a 3mm Hex wrench.
Torque not to exceed 1.6Nm/14inlbs.

Adapters

Remove the bolt and washer from the adapter and install into the mounting arm slot.
Thread on the adapter with the washer on the opposite side flush against the bolt head.
Torque to no more than 1.6Nm/14inlbs using a Hex wrench.
Apply a small amount of Blue LOCTITE® #242 to the threads of the adapter bolt if needed to keep it from coming loose.

Carbon Fiber Stem Mount

Replace the stem’s screws (the bottom left and right), by inserting the spacer first, then the mount, washer and finally the long black Titanium screws.
Don’t use excessive force it may break the product and void the warranty.
Tighten the screws using the torque suggested by your stem manufacturer approx. 2 to 3Nm and lube the bolt with anti-seize grease.
Check holes for alignment between front clamp & stem. If there is an alignment mismatch top to bottom, the screw can undergo abnormal stresses and could break.
Before tightening make sure that the titanium screw penetrates the stem with full thread engagement. If screws don’t fully engage, please contact us.

Name

Message

Polar Computer Mount

AS-P100B

Regular price $30.00

Shipping calculated at checkout.

Mount your Cycling Computer Out front and Center. Slide and Rotate to eliminate glare and optimize the viewing angle.

Works with POLAR® M460 and V650 series computers.

Mounting Arm

Mount up to Two devices on one Mounting Arm
Mount your devices out-front or behind the bars
Rotate and slide your devices to multiple positions
Free up bar space with only one mount for all your devices
Buy only one mount and save money
No need to buy new mounts for new devices
Strong, light, and shock absorbing
Fits all 31.8mm diameter bars
Torque not to exceed 1.6Nm/14inlbs

Cycling Computer Adapter

Works with POLAR® M460 and V650 series computers.
Slide and Rotate: Slide and Rotate your computer to most positions.
Eliminate Glare: Rotate your computer to Eliminate Glare.
Optimize the Viewing Angle: Rotate and Slide the computer to your Optimum-Viewing Angle.
Torque not to exceed 1.6Nm/14inlbs

Made from a CARBON composite Nylon
Weight 37g
Designed, engineered, and manufactured in the U.S.A

Instructions

Mounting Arm

Mount onto the handle bar to the left or right of the stem and tighten with a 3mm Hex wrench.
Torque not to exceed 1.6Nm/14inlbs.

Adapters

Remove the bolt and washer from the adapter and install into the mounting arm slot.
Thread on the adapter with the washer on the opposite side flush against the bolt head.
Torque to no more than 1.6Nm/14inlbs using a Hex wrench.
Apply a small amount of Blue LOCTITE® #242 to the threads of the adapter bolt if needed to keep it from coming loose.

Carbon Fiber Stem Mount

Replace the stem’s screws (the bottom left and right), by inserting the spacer first, then the mount, washer and finally the long black Titanium screws.
Don’t use excessive force it may break the product and void the warranty.
Tighten the screws using the torque suggested by your stem manufacturer approx. 2 to 3Nm and lube the bolt with anti-seize grease.
Check holes for alignment between front clamp & stem. If there is an alignment mismatch top to bottom, the screw can undergo abnormal stresses and could break.
Before tightening make sure that the titanium screw penetrates the stem with full thread engagement. If screws don’t fully engage, please contact us.

Name

Message

Polar Computer Adapter

AD-P100B

Regular price $10.00

Shipping calculated at checkout.

Mount your computer Out front and Center of the bars. Slide and Rotate to eliminate glare and optimize the viewing angle.

Works with Polar® M460 and V650 cycling computers.

Features

Cycling Computer Adapter works with Polar® M460 and V650 cycling computers.
Slide and Rotate: Slide and Rotate your computer to most positions.
Eliminate Glare: Rotate your computer to Eliminate Glare.
Optimize the Viewing Angle: Rotate and Slide the computer to your Optimum-Viewing Angle.
Torque not to exceed 1.6Nm/14inlbs

Made from a CARBON composite Nylon
Weight 8g
Designed, Engineered and Made in the U.S.A

Instructions

Mounting Arm

Mount onto the handle bar to the left or right of the stem and tighten with a 3mm Hex wrench.
Torque not to exceed 1.6Nm/14inlbs.

Adapters

Remove the bolt and washer from the adapter and install into the mounting arm slot.
Thread on the adapter with the washer on the opposite side flush against the bolt head.
Torque to no more than 1.6Nm/14inlbs using a Hex wrench.
Apply a small amount of Blue LOCTITE® #242 to the threads of the adapter bolt if needed to keep it from coming loose.

Carbon Fiber Stem Mount

Replace the stem’s screws (the bottom left and right), by inserting the spacer first, then the mount, washer and finally the long black Titanium screws.
Don’t use excessive force it may break the product and void the warranty.
Tighten the screws using the torque suggested by your stem manufacturer approx. 2 to 3Nm and lube the bolt with anti-seize grease.
Check holes for alignment between front clamp & stem. If there is an alignment mismatch top to bottom, the screw can undergo abnormal stresses and could break.
Before tightening make sure that the titanium screw penetrates the stem with full thread engagement. If screws don’t fully engage, please contact us.

Name

Message

Currency

FOR POLAR® M460 and V650 COMPUTERS