Adapters


Quick view
Camera & Light Adapter
$10.00
Quick view
Universal Adapter
$10.00
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter
Camera & Light Adapter

Camera & Light Adapter

AD-CL100B

$10.00
/
Shipping calculated at checkout.

Mount your Action Camera or Cycling Light Out front and Center using our Camera/Light adapter. Its a three tab design that is compatible with any action camera or light that has a two tab adapter and uses a M5 bolt. Mount your camera or light right side up, upside down, slide it forwards and backwards or rotate it to capture all your experiences on video or light up the night.

    Works with all GoPro® Hero Cameras, Action Cameras and Lights

      Features

      • Camera and Light Adapter works with all GoPro® Hero and other style Action cameras and Cycling Lights.
      • Positions your Camera or Light Out front and Center
      • Camera can be mounted facing forward or backwards
      • Rotate and Slide your Camera to capture different views
      • Mounts Upside down or Right side up
      • Torque not to exceed 1.6Nm/14inlbs.

      Made from a CARBON composite Nylon
      Weight 15g
      Designed, Engineered and Made in the U.S.A

      Recommendations

      • We recommend mounting the Camera adapter in the middle to the back of the mount for better stability.

      Instructions

      Mounting Arm

      • Mount onto the handle bar to the left or right of the stem and tighten with a 3mm Hex wrench.
      • Torque not to exceed 1.6Nm/14inlbs.

      Adapters

      • Remove the bolt and washer from the adapter and install into the mounting arm slot.
      • Thread on the adapter with the washer on the opposite side flush against the bolt head.
      • Torque to no more than 1.6Nm/14inlbs using a Hex wrench.
      • Apply a small amount of Blue LOCTITE® #242 to the threads of the adapter bolt if needed to keep it from coming loose.

      Carbon Fiber Stem Mount

      • Replace the stem’s screws (the bottom left and right), by inserting the spacer first, then the mount, washer and finally the long black Titanium screws.
      • Don’t use excessive force it may break the product and void the warranty.
      • Tighten the screws using the torque suggested by your stem manufacturer approx. 2 to 3Nm and lube the bolt with anti-seize grease.
      • Check holes for alignment between front clamp & stem. If there is an alignment mismatch top to bottom, the screw can undergo abnormal stresses and could break.
      • Before tightening make sure that the titanium screw penetrates the stem with full thread engagement. If screws don’t fully engage, please contact us.
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter
      Universal Adapter

      Universal Adapter

      AD-U100B

      $10.00
      /
      Shipping calculated at checkout.

      Mount any 31.8mm bar mountable device on the Universal Adapter. Mount Cycling Computers, Lights and Sport Watches, such as NITERIDER®, CYGOLITE®, EXPOSURE®, CATEYE®, APPLE® and POLAR®.

      Features

      • Mount any 31.8mm bar mountable device on the Universal Adapter
      • Mount a Light Out front, Center and lower to the ground for improved lighting
      • Mount your Cycling Computer or Sport Watch Out front
      • Torque not to exceed 1.6Nm/14inlbs
      Made from a CARBON composite Nylon
      Weight 12g
      Designed, Engineered and Made in the U.S.A

      Instructions

      Mounting Arm

      • Mount onto the handle bar to the left or right of the stem and tighten with a 3mm Hex wrench.
      • Torque not to exceed 1.6Nm/14inlbs.

      Adapters

      • Remove the bolt and washer from the adapter and install into the mounting arm slot.
      • Thread on the adapter with the washer on the opposite side flush against the bolt head.
      • Torque to no more than 1.6Nm/14inlbs using a Hex wrench.
      • Apply a small amount of Blue LOCTITE® #242 to the threads of the adapter bolt if needed to keep it from coming loose.

      Carbon Fiber Stem Mount

      • Replace the stem’s screws (the bottom left and right), by inserting the spacer first, then the mount, washer and finally the long black Titanium screws.
      • Don’t use excessive force it may break the product and void the warranty.
      • Tighten the screws using the torque suggested by your stem manufacturer approx. 2 to 3Nm and lube the bolt with anti-seize grease.
      • Check holes for alignment between front clamp & stem. If there is an alignment mismatch top to bottom, the screw can undergo abnormal stresses and could break.
      • Before tightening make sure that the titanium screw penetrates the stem with full thread engagement. If screws don’t fully engage, please contact us.